Fit - D-rings and Cord
 |
| Using a pencil mark the position for the d-ring fitting on the back of the frame. It is important the mark is made behind the highest point of the frames profile, to ensure the screw does not go through the frame! In most cases this will be approximately 1/3 of the way down and central from the top of the frame, use a tape measure or ruler to ensure the distances are equal. |
 |
| Place the d-rings over the pencil marks created in the previous step; double check they are positioned over the highest point on the frame. |
 |
| Using a Pozzi head screwdriver screw the d-ring into the frame. |
 |
| Loop the cord through the two d-rings and tie up as securely as possible. |
